BUILD-UP CAPS FOR ‘IN AIR’ MEASUREMENTS

Custom Caps Available


	Build-up Caps for the Capintec PR-06C or G, 0.6cm³ Farmer Style Chamber with a 0.28 mm wall thickness of air equivalent plastic and a density of 1.785 g/cm³. These build-up caps fit over the Cobalt 60 polystyrene (density 1.04 g/cm³) build-up cap that has a wall thickness of 5.2 mm and a 17.5 mm outside diameter.

D-Max In Water	Nominal Energy
11 mm	4MV
15 mm	6MV
24 mm	10MV
27 mm	15MV
30 mm	18MV
35 mm	20MV

Acrylic Density 1.85 g/cm³
Item #	Wall Thickness
660-104	4.30 mm
660-106	7.7 mm
660-110	15.3 mm
660-115	17.8 mm
660-118	20.3 mm
660-120	24.6 mm

D-Max In Water	Nominal Energy
11 mm	4MV
15 mm	6MV
24 mm	10MV
27 mm	15MV
30 mm	18MV
35 mm	20MV

Lead Density 11.35 g/cm3
Item #	Wall Thickness
660-1404	0.45 mm
660-1406	0.80 mm
660-1410	1.59 mm
660-1415	1.86 mm
660-1418	2.12 mm
660-1420	2.56 mm

Aluminum Density 2.718 g/cm³
Item #	Wall Thickness
660-404	1.87 mm
660-406	3.4 mm
660-410	6.7 mm
660-415	7.8 mm
660-418	8.9 mm
660-420	10.7 mm

Polystyrene Density 1.05 g/cm³
Item #	Wall Thickness
660-604	4.85 mm
660-606	8.74 mm
660-610	17.4 mm
660-615	20.28 mm
660-618	23.17 mm
660-620	27.97 mm

Copper Density 8.90 g/cm3
Item #	Wall Thickness
660-1504	0.57 mm
660-1506	1.02 mm
660-1510	2.03 mm
660-1515	2.37 mm
660-1518	2.71 mm
660-1520	3.27 mm

Plastic Water Density 1.02 g/cm3
Item #	Wall Thickness
660-1704	4.99 mm
660-1706	8.91 mm
660-1710	17.74 mm
660-1715	20.68 mm
660-1718	23.62 mm
660-1720	28.52 mm

Brass Density 8.515 g/cm³
Item #	Wall Thickness
660-704	0.60 mm
660-706	1.07 mm
660-710	2.12 mm
660-715	2.48 mm
660-718	2.83 mm
660-720	3.42 mm


	Note: At energies above 10 MV metal Build-Up Caps may become slightly activated, please check and take appropriate precautions.

Radiation Products Design, Inc www.rpdinc.com sales@rpdinc.com
763-497-2071 Fax 763-497-2295 5218 Barthel Industrial Drive Albertville, MN 55301