• Usable on all CT scanners
• Head and abdominal configurations included
• Made from acrylic with a density of 1.19 gm/cc
• Includes 9 PMMA plugs
• 1.31 cm inside hole dia. sized for standard CT Dose probes
• Rugged foam lined carrying case included

The CT Dose Phantom is manufactured to comply with the FDA’s performance standard for diagnostic x-ray systems, which includes Computed Tomography Systems (21CFR 1023.33).

Each phantom consists of two 14 cm thick Solid PMMA disks measuring 16 cm (head) and 32 cm (body) in diameter.

There are a total of 9 through holes with acrylic rods to plug the holes when not in use. Through holes are 1.31 cm in diameter to accommodate standard CT probes. One hole is at center and four are around the perimeter, 90° apart and 1 cm from hole center to the outside edge of the phantom.

The head and body phantoms and nine acrylic plugs are packaged in a rugged foam-lined carrying case. The phantom also includes ergonomic handles for ease of use.