Delclos Mini-Ovoid Long Handle Afterloading Applicator Set

with Tandem Support

Item #

Description

970-653

Mini-Ovoid Long Handle Applicator Set with Sterilization Tray

970-653-01

Mini-Ovoid Long Handle Applicator Set without Sterilization Tray

970-653-02

Mini-Ovoid Long Handle Applicator with Bucket Carriers

Replacement Parts

Cesium-137 Tube Sources

 Sterilization Procedures

The Delclos Mini-Ovoid Long Handle Afterloading Applicator was designed for the patient with a narrow or tortuous vault that will not accommodate the round ovoid of the standard Fletcher-Suit Applicator. The ovoid is flattened medially to accommodate a very small anatomy.  The flattened area results in an increased dose to the cervix.  The handle is 19 cm long to the ovoid.  The ovoids are 12 mm in width x 29 mm high, have an angle of 15O and do not have shielding.    The applicator uses a two piece adjustable handle pivot bracket with a tandem support hook.   The applicator bucket carriers accommodate Cesium 137 sources or Radium 226 sources up to 3.4 mm diameter x 23 mm long.  Dummy sources are available (Item 985-000 through Item 985-031).  Tungsten shielded ABS ovoid caps are optional.  The tandems are marked every 2 cm over and 8 cm range.

Item 970-653 Delclos Mini-Ovoid Long Handle Applicator Set with Tandem Support includes:
(1) Applicator with adjustable handle bracket with a tandem support hook and two bucket carriers
(4) Stainless steel tandems and caps - 15o, 30o, 45o and 60o
(1) Cervical stop
(2) Flagged cervical stops
(2) Allen wrenches
(4) Plastic tandems and pushers
(1) Sterilization tray

Item 970-653-01 is the same as Item 970-653 without the sterilization tray.

Item 970-653-02 is the applicator with handle bracket and tandem support hook, two bucket carriers, and a wrench.

Replacement parts for the Delclos Mini-Ovoid Long Handle Applicator (Items 970-653, 970-653-01, and 970-653-02) are listed as follows:

Item #

Description

970-000

12 Plastic Tandems and Pushers

970-010

12 Plastic Tandems

970-020

12 Plastic Pushers

970-200

 Straight Standard Tandem w/Cap

970-201

#1 - 15o Standard Tandem w/Cap

970-202

#2 - 30o Standard Tandem w/Cap

970-203

#3 - 45o Standard Tandem w/Cap

970-204

#4 - 60o Standard Tandem w/Cap

970-205

#3 - 45o Double Curved Tandem for Bracket with Cap

970-206

#4 - 60o Double Curved Tandem for Bracket with Cap

970-212

Cap for Tandem

970-216

Cervical Stop

970-217

Flagged Cervical Stop

970-218

Screw Cervical Stop #4-40 x 5/16”

970-220

3/32” Allen Wrench

970-670-59

Optional - 3/32” Large Handle Allen Wrench

970-229-6

1/16” Allen Wrench

Item #

Description

970-641-12

Cap for Ovoid Handle

970-643-18

Tandem Support Hook

970-643-20

Upper Left Handle Bracket

970-643-21

Lower Right Handle Bracket

970-643-22

Handle Bracket Set

970-643-23

Nylon Pivot for Bracket

970-643-40

Right Bucket Carrier (Long Handle)

970-643-42

Left Bucket Carrier (Long Handle)

970-643-50

Knob with Holes #10-32

970-643-51

“U” Knob #10-32

970-645-06

Sterilization Tray

970-650-21

   Optional - 2.0 cm Right ABS Ovoid Cap w/Tungsten

970-650-22

Optional - 2.0 cm Left ABS Ovoid Cap w/Tungsten

970-650-26

  Optional - 2.5 cm Right ABS Ovoid Cap w/Tungsten

970-650-27

Optional - 2.5 cm Left ABS Ovoid Cap w/Tungsten

970-650-31

 Optional - 3.0 cm Right ABS Ovoid Cap w/Tungsten

970-650-32

Optional - 3.0 cm Left ABS Ovoid Cap w/Tungsten

Radiation Products Design, Inc                 www.rpdinc.com                     sales@rpdinc.com
 763-497-2071    Fax 763-497-2295     5218 Barthel Industrial Drive  Albertville, MN 55301