|
 • Digital readout - 4 digit-rate, 6 digits integrate
• Small and lightweight
• TBM package
• Flat response - air ion chamber
• Sees axially below 5 keV gamma or x-ray
• Reads alpha, beta, gamma, x-ray
• Fast response
• Wide range
The Digital Cutie Pie consists of a 3.25” dia. x 3.25” long air ion chamber coupled to a stable solid state MOSFET input electrometer with built-in A to D converter to read out directly in mR/h or mR (Sv/h also available). Range is 0.1 mR/h to 999.9 mR/h and 1 mR/h to 9.999 R/h. 200 mg/cm2 graphite lined phenolic walls give accurate “air equivalence”. A thin (0.5 mg/cm2) Mylar window allows high sensitivity readings for alpha and for low energy beta such as C-14 in addition to higher energy betas, gammas and x-rays.
Specifications
Dimensions: 5 1/2” x 3 1/2” x 8” including handles
Detector: Air ion chamber 3.25” dia. x 3.25” long,
Internal Volume 270 cc
Wall & Cap: Phenolic, graphite lined 200 mg/cm2 walls and 400 mg/cm2 cap
Window: 2.87” dia. x 0.5 mg/cm2 mylar
Readout: LCD 6 digits
Indicator Lamp: Red LED 10 pulses/min per mR/h
Range:
Rate: Four digits 0.1mR/h to 999.9 mR/h switchable to 1 mR/h to 9.999 R/h
Integrate: 6 digits
Electrometer: Solid State MOSFET input
Electronics: A-D converter LCD drivers
Batteries: 10 each NEDA CR-1220 - shelf life 7 years 2 each Eveready E93, C cell or eq. - 1000 hours.
Options: Readout in SI units
Weight: 26 oz. complete with batteries (0.75 kg.)
Shipping Weight: 4 lbs. (1.8 kg.)
|
