DRY HEAT STERILIZER

Item #

Description

936-700

Dry Heat Sterilizer

The Wayne Dry Heat Sterilizer is a fine precision instrument utilizing all the improved techniques developed in the designing, engineering and manufacturing of dry heat sterilizers. Only the best hospital grade material and scientifically proven components are used and they perform satisfactorily for many years.

This sterilizer operates at 320° - 360°F (160° - 180°C) automatically. Simply place unsterile items in the trays (plus small needle tray), and set the timer. This unit plugs into 115V AC current.
• Precision thermostat, signal light, thermometer
• Rapid heat-up time with safety limit control
• Two hour timer with “HOLD” position936-700-A
• Finest hospital grade stainless steel
• Glass wool insulation for minimum heat loss
• Convenient instrument tray handle
• Accommodates most instrument trays
• Meets all electrical standards - UL listed
• FDA registered

Specifications

Inside Dimensions:
Width: 15.5”
Height: 10.5”
Depth: 9.5”

Inside Dimensions:
Width: 11.5”
Height: 5.0”
Depth: 7.5”

Weight: 17 lbs
Power: 450 watts
Operating Temperatures: 320° - 360°F (160° - 180°C)

DRY HEAT STERILIZER ACCESSORIES

Item #

Description

936-701

Nylon Dry Heat Sterilizing Pouch, 2” x 10” (100/Box)

936-702

Nylon Dry Heat Sterilizing Pouch, 4” x 10” (100/Box)

936-703

Nylon Dry Heat Sterilizing Pouch, 7” x 10.5” (100/Box)

936-708

Dry Heat Indicator Strips, 4” (100/Box)

936-710

Sterilizer Spore Test Kit (Qty 12)

936-711

Sterilizer Spore Test Kit (Qty 52)

936-701-A
Nylon Dry Heat Sterilizing Pouches
These self-sealing pouches are available in three sizes.
For use in dry heat sterilization process only.

936-708-A
Dry Heat Indicator Strips
These four inch strips are for use in dry heat processes up to 420°F. The indicator turns from green to brown. Insert in package or outside of package.

936-710-A
Spore Test Kits
Testing kits are for use in steam, chemical vapor, dry heat and EO gas sterilization processes. CDC states that sterilizers should be biologically monitored with a spore test at least weekly, and every load that contains an implant.

Radiation Products Design, Inc         www.rpdinc.com           sales@rpdinc.com
 763-497-2071   Fax 763-497-2295   5218 Barthel Industrial Drive Albertville, MN 55301