4X Hi-Lo Illuminator

Item#
Automatic Switches

Item #
Standard Switches

Description

# Viewing Areas

1020-502 

1020-542

Desk/ Surface Mounting

2

1020-503 

1020-543

Desk/ Surface Mounting

3

1020-504

1020-544

Desk/Surface Mounting

4

1020-512

1020-552

Desk/Surface Mounting

2 Over 2

1020-513

1020-553

Desk/Surface Mounting

3 Over 3

1020-522

 1020-562

Recessed Wall Mounting

2

1020-523

1020-563

Recessed Wall Mounting

3

1020-532

1020-572

Recessed Wall Mounting

2 Over 2

1020-533

1020-573

Recessed Wall Mounting

3 Over 3

Dimensional Information

# Viewing Areas

Two

Three

Four

Case Width

28 3/4”

42 3/4”

56 3/4”

Wall Opening

29”

43”

57”

Case Depth

3 3/4”

3 3/4”

3 3/4”

Height Dimensions

 

Single Tier

Double Tier

Case Height

21 1/2”

43”

Wall Opening

21 3/4”

43 1/4”

• Dual Brightness System
• Four 15W Fluorescent Tubes Per Viewing Section
• Superior Light Distribution
• Surface and Recessed Models
• Positive Gravity Grip Film Holder

The 4X Hi-Lo Illuminators have a unique four tube dual brightness system which provides two levels of light intensity. Each 14” x 17” viewing area has four F15T8/D fluorescent tubes, two low leakage thermally protected ballasts and specially designed reflectors. On the low setting light distribution is far superior to conventional two tube viewers. When additional illumination is required a touch of a switch increases the light output of the four lamps to their maximum brightness. Each viewing section is controlled by an on/off rocker switch and a Hi-Lo brightness selector switch. A master on/off switch is also supplied for each tier of three or more banks. All switches are grouped together and mounted in the center of the front panel on the bottom tier.

Low leakage instant on ballasts, internal dividers (to prevent light “spill over”), centered cluster switches, one piece plexiglass fronts and continuous stainless steel gravity film grips are supplied as standard. A master on/off switch is also supplied for each tier of three or more banks. Each tier of the illuminator is of one piece heavy duty steel construction.

Recessed models come complete with recessing flanges (in white baked enamel) permanently welded to the case. Holes are provided in the flange for ease of mounting.

Options: 1 to 6 banks wide
1 or 2 tiers
Automatic or standard switches
Hospital grade plug.

Finish: White Baked Enamel, Stainless Steel Trim (recessing flanges are white baked enamel.

Electrical: Viewers operated on 120 volt, 60 Hz, 1.6 Amps AC per viewing area. Surface mounting models are supplied with a 6’ three conductor line cord. Recessed models come with BX connectors.


Trimline Plus Hi-Lo Illuminators

Item #

Description

Wall Mounting Size

Ship Weight

 1020-602 

2 Bank Unit w/ 28” x 17” view

22” H x 28” W x 3 1/4” D

45 lbs.

 1020-603 

3 Bank Unit w/ 42” x 17” view

22” H x 42” W x 3 1/4” D

68 lbs.

 1020-604

4 Bank Unit w/ 56” x 17” view

22” H x 56” W x 3 1/4” D

93 lbs.

 1020-622 

2 Over 2 w/ 28” x 34” view

44” H x 28” W x 3 1/4” D

94 lbs.

 1020-633 

3 Over 3 w/ 42” x 34” view

44” H x 42” W x 3 1/4” D

131 lbs.

The Trimline Plus Hi-LoTM provides two light intensities per each 14 x 17” viewing area. Uniquely at the lower light intensity, all 4 bulbs remain lit to maintain the even light distribution. The Trimline Plus Hi-LoTM is available in 12 sizes.

It features a sleek 3 1/4” deep cabinet with a baked on white finish, a roller grip film retainer, film activated auto switches. Cluster switches on 2 over 2 units and up. Recessed wall mounting is available and includes a frame.

Features:
• Variable light intensities per viewing area
• Film activated auto switches
• Cluster switches and a master switch on 2 over 2 units and up
• Gravity roller grip film retainer
• “E-Z”TM Bar for easy surface wall mounting
• Power: 120VAC, 60Hz, 1.10 Amp


Desk Top View Boxes

Item #

Description

Power

 1020-24

Small View Box

115 VAC, 60 Hz

 1020-36

Large View Box

115 VAC, 60 Hz

• Shatter-resistant acrylic top gives maximum light diffusion and minimum glare
• Rubber feet prevent sliding
• Screw-on acrylic top is easily replaced and all interior components are easily serviced
• No starters to burn out
• 6 ft., 3-wire electric cord with grounding plug
• Rust-resistant stainless steel frame
• Listed by Underwriters’ Laboratories

Specifications

Item 1020-24
Size: 18” W x 24 3/8” L x 3 1/4” H
Lamps: Four 20 watt fluorescent bulbs
Switches: Two (each switch controls two bulbs)
Weight: 16 lbs.

Item 1020-36
Size: 24 3/8” W x 36” L x 3 1/4” H
Lights: Six 20 watt fluorescent bulbs
Switches: Three (each switch controls two bulbs)
Weight: 27 lbs..


Intensi-Spot

Item #

Description

Size

 1021-295 

Intensi-Spot

9” H x 6” D

Designed to provide a concentrated light source. The Intensi-Spot utilizes a 100-watt lamp, shielded by an octagon mask for light concentration.

The Intensi-Spot tilts to any angle and includes, foot switch operation. The unit comes in a baked enamel finish, with holes in the base for wall mounting, and a 6’ line cord with 3 prong plug.

Specifications

Size: 9” H x 6” D
Power: 120VAC, 60Hz
Shipping Weight: 5 lbs.


Cool-Lite

Item #

Description

Size

 1021-695 

Cool-Lite

10 1/2” H x 6” D

This unique viewing device provides concentrated light like the Intensi-Spot, but eliminates the heat by the use of a fluorescent bulb. Energy efficient, the Cool-Lite can be left on all day.

The Cool-Lite tilts to any angle, has a baked enamel finish and includes holes in the base for easy wall mounting. Cool-Lite comes with a 6’ line cord with 3 prong plug.

Specifications

Size: 10 1/2” H x 6” D
Power: 120VAC, 60Hz
Shipping Weight: 5 lbs.


Bright-Spot Illuminator

Item #

Description

Size

 1021-188 

Bright Spot Illuminator

6” W x 8” H x 7” D

• Wall or Desk Mount
• Swivel Base
• Variable Intensity Foot Switch Control

A unique low cost bright spot illuminator for viewing dense films. The lamp housing swivels for easy viewing, base has key holes for wall mounting and plastic non-marring feet to stand on a desk. A rheostat foot switch is supplied to vary the brightness of the special high intensity bulb which is surrounded by a polished aluminum reflector.

Specifications

Finish: Light gray baked enamel
Power: Viewer operates on 120 VAC, 60Hz, .7 Amps AC.  Supplied with a 6’ and 3 conductor line cord. 

Radiation Products Design, Inc         www.rpdinc.com           sales@rpdinc.com
 763-497-2071   Fax 763-497-2295   5218 Barthel Industrial Drive Albertville, MN 55301