|
The Manual Dose Injector is designed to reduce exposure when injecting radionuclides. The injector is also useful when the injection protocol is a slow infusion as with Zevalin™.
The Manual Dose Injector features a spring-loaded clamp to hold the syringe barrel firmly in place. There is a 1” thick lead base to protect hands. The syringe plunger is held by the injector plunger so that the syringe plunger can move forward or back. The Dose Injector can be easily transported or placed wherever administrations are performed. It can also be used in pharmacies to remove needles or recap.
Here’s how it works:
1. Remove the needle - Place a shielded syringe into the Manual
Dose Injector. Use a forceps to hold the needle hub. Turn the lead base and the needle detaches.
2. Attach a butterfly, etc. - Use a forceps to hold the butterfly hub.
Place the hub onto the syringe luer lock. Turn the lead base and the butterfly is attached.
3. Inject - Use the plunger on the Dose Injector to push the syringe plunger.
Specifications
Dimensions: 11.5” W x 5” depth x 10.75” H (29 x 12.7 x 27 cm)
Shielding:
Base: 1” thick lead (2.5 cm)
Plunger: 0.5” thick tungsten (1.25 cm)
Finish: Durable power coat paint
Adjustable: 0° to 45° angle
Weight: 8.5 lb (3.8 kg)
|
