|
The Electon Cone Adapter Plates, Items 895-400 and 895-401, allow the 15cm electron cone to hold the Electron Mini-Cones, Items 895-41900 to 895-47045. The adapter plates are 1/2" thick steel with a nickle chrome plate finish. A 4” diameter opening in each adapter plate and three (3) spring plungers hold the brass ring base of each Electron Mini-Cone. If side or front pressure is presented, the spring plungers allow the Electron Mini-Cone to flip out.
The Electron Mini-Cones are made of clear acrylic and affixed to a 3/8" thick x 4" diameter nickel chrome brass ring base. The Electron Mini-Cones are available in diameters of 1.9 cm, 3.2 cm, 4.5 cm, 5.7 cm and 7.0 cm and can have angles of 15°, 30°, 45°, and 0° on the bottom of the Electron Mini-Cone.
Transmission at 12 MeV is less than 5%
Steel Density: 7.83 g/cm3
Brass Density: 8.515 g/cm3
Energy Range: 6 MeV to 12 MeV
Specifications
Adapter Plate (Items 895-400 and 895-401)
Size: 15 cm x 15 cm
Opening: 4" Diameter
Material: 3/4" Thick Steel
Finish: Nickel Chrome Plated
Sterilization: Autoclave or Gas - Sterrad NX-100
Electron Mini-Cone (Items 895-41915 to 895-47090)
Base: 3/8" Thick x 4" Diameter Brass Ring
Material: Clear Acrylic
Sterilization: Gas - Sterrad NX-100
|
