• Smooth gliding motion on roller bearings
• High range of motion
• Counter-balanced cassette holder
• Counter-balanced base
• Cassette safety latch
• Easy loading from either side
• Automatic angle indicators

The Mobile Cassette Holder has been engineered around the needs of the radiation therapist with unmatched ease of motion obtained through the use of precision components.

Needle roller bearings enable smooth travel both vertically and horizontally eliminating the frustrating binding action found on other cassette holders when repositioning. The Cassette Holder glides freely even while a heavy cassette is loaded.  A counter-weight offsets the weight of the cassette, allowing for almost effortless motion. The Cassette Holder is able to position close to tables and objects due to the unique base counter-weight system and the offset square post (figure A). These 2 features prevent rotation and the possibility of the unit tipping over.

The Cassette Holder can tilt 180° (figure B), rotate 360° (figure C) and is spring loaded to provide tension on the cassette to ensure that it is secured. A spring loaded latching system (figure D) enables up to a 14” x 17” cassette to be inserted from either side and once latched, secures the cassette from sliding out during rotation. The cassette carrier will also accept 14” x 36” and 17” x 28” cassettes by bypassing the latching mechanism.

Easy to read angle indicators (figures C & E) allow for accurate angulation of the cassette carrier. Indicator scales coincide with the degree rotation of the treatment machine gantry, eliminating the need for calculating the correct cassette carrier angle. Simply rotate the cassette carrier so the degree indicator reading is the same as the machine gantry reading, and the correct corresponding angle is automatically established.

Motion locking systems are equipped with large comfortable ratchet type handles which enable the operator to easily secure positions with minimal effort. Easy mobility is accomplished with four high quality ball bearing wheels. The wheels have a toe tap positive locking mechanism which doesn’t allow swivel or movement of the wheel, providing excellent safety and stability.

Specifications

Maximum cassette height: 177 cm
Minimum cassette height: 38 cm
Max. cassette extension: 66 cm from front edge of base to center of cassette
Arm Length: 36”
Base: 19” x 24”
Height: 82 3/4” (210 cm)
Finish: Textured tan polyurethane , clear and black anodizing
Weight: 145 lbs.
Shipped UPS (3 cartons)

RPD design allows the cassette holder to extend 6” further over the couch than other units on the market. Option of custom post height for extended range couches.

Huestis Flex-Holder® significantly reduces retakes caused by improper cassette positioning. It permits smoother scheduling and superior radiographs saving film, time and labor for cost effective radiographic procedures. 

The free-standing model features an extra wide base for maximum stability. It allows accurate radiographs to be taken from virtually any angle from floor level to 71” + (180 cm) high. It rolls into position on large, locking casters and tilts the cassette 180O facing straight up, down, or anywhere in between. This free-standing model accepts virtually all cassettes.

Accurate calibration scales on the column and arm provide exact repeatable angulation.

Flexible Arm Movement
• Rotates cassette 360O clockwise or counterclockwise
• Arm rotates 360O on vertical column
• Arm assembly is counter-weighted for easy raising or lowering
• 36” (91 cm) arm

Convenient Ratchet Handles
Ratchet handles can be repositioned easily to help eliminate  interference problems when positioning cassettes.

One Hand Operation
A lip on the cassette holder enables the cassette to be inserted
with one hand, if necessary.

Accurate Calibration Scales
Column and arm calibration scales provide exact, repeatable angulation.

Easy Operation
Drop cassette against stop and tighten grips. Adjust visually or  by calibration scales. Roll into place and lock casters.

Diagnostic
• Three-way studies of acute abdomens
• Myelograms
• Fractures where patient is immobilized
• Lateral decubitus fluid level studies of abdomen and chest
• Operating room radiography

Therapeutic
• Radiation therapy verification films (portal films)
• Localization for tangential breast, isocentric or oblique fields
• Simulation without fluoroscopy
• Implant source localization by orthogonal films

Specifications

Base: 19” x 22”
Overall Height: 75”
Weight: 110 lbs.
Ships by truck