Reinforced MOSFET Dosimeter -Now Standard
Reinforcing the MOSFET dosimeter increases its durability during procedures that may cause high stress to the dosimeter, A thin layer of protective plastic coating is added to the tip of the dosimeter, which hardens, strengthens and protects the sensor.

High Sensitivity MOSFET Dosimeter
The high sensitivity MOSFETs are three times as sensitive as the standard MOSFETs and help to maintain reproducibility at low doses. The high sensitivity MOSFETs are ideal for scatter doses to regions at risk, or radiology dose measurements.

microMOSFET Dosimeter
With a width of 1.0 mm and an extra long 375 mm flex, the microMOSFET dosimeter is small enough and long enough for use inside a 6 Fr catheter.

Radio-opaque Marker for Visualization
A tiny tungsten radio-opaque ,marker is added to the tip of the MOSFET dosimeter with OBI, or other imaging procedures. Additionally, these dosimeters are fully coated with a special plastic material that makes them more durable for repeated insertions inside a catheter.

Plain Dosimeter
The plain MOSFET dosimeter does not have the protective plastic coating. Customers with customized phantoms with tight tolerances may require the plain dosimeter otherwise we recommend the reinforced

Linear 5ive Array
The Linear 5ive Array incorporates five (5) sensors separated 20 mm, center to center, on one 460 mm flex with a tungsten radio-opaque marker at the tip. the length of the dosimeter flex is fully coated with a special plastic material for greater durability during catheter insertions.