|
The PET Workstation consists of a steel table with a drawer, lower shelf, container well and side and back shields. The L-Block must be ordered separately.
The workstation table is made of 2” steel tubing. The sides and back walls are 2” thick lead bricks covered with steel panels on both sides. The four corner posts are filled with lead.
The container well is 19 1/2” from the front of the table and has 2 1/2” thick lead walls for the detector chamber to be placed into. The 2 1/2” leaded bottom of the container well rotates to accommodate the insertion of the detector chamber from the bottom. The container well bottom then rotates back and is bolted in place. The container well rises 4” above the table top and is 16” deep. The overall diameter of the container well is 13 1/2” with an inside diameter of 7”. This size container well accommodates the Capintec CRC®-15PET detector chamber.
The workstation has 4 heavy duty casters welded to the frame. Each caster is rated at 2,000 lbs and the rear casters are locking.
Options for PET Workstation
Item 994-488: 2” thick lead L-Block with a 8” W x 8” L x 4” thick lead glass window.
L-Block Dimensions: 14” W x 17 1/2” D x 24 3/4” H
Item 994-036: Stainless steel tray that holds the dose calibration display unit. Customer must state size needed.
Item 994-021: Pair of steel channels that distribute the heavy weight of this workstation over a large floor area.
Item 994-040-21: 2 1/2” Thick Leaded Rotating Well Top Cover
Specifications
Workstation:
Overall Dimensions: 27 3/4” W x 35 3/4” L x 61” H
Table Top Dimensions: 23 1/4” W x 31 1/4” L x 34 3/4” H
Side/Back Wall Height: 16”
Color: Durable tan textured polyurethane enamel paint
Weight: Approx 2,650 lbs
Note: The workstation can be manufactured to fit other dose detector chambers. When placing an order please specify manufacturer of dose calibrator detector, model, outside diameter and height.
|
