Item 996-734: Source Holder for Iridium IVB Sources: Centers the source train in the active area of the well chamber for a measurement. The source holder is adjusted to accommodate the number of seeds in the source to be measured.
Item 996-742: X-Ray Contamination Test Tool: Is designed for use with 90Sr/90Y sources only. It consists of a 7 mm thick wall of delrin that absorbs nearly all of the beta particles. It allows only the bremsstrahlung radiation to pass through the source holder for measurement.
Item 996-744: Source Holder for HDR Iridium: Is designed for high dose rate iridium measurements. It has a 2.2 mm diameter opening for the catheter. A rubber o-ring secures the catheter with a uniform constricting pressure to prevent and movement of the catheter.
Item 996-746: Source Holder for Cesium Remote Afterloading: Has a 7.1 mm diameter opening. This insert is used with LDR remote afterloading treatment systems. There is no spacer because the afterloading system positions the sources.
Item 996-748: Source Holder for RAPID Strand™ Iodine Seeds: Provides a fast and convenient method to perform a quality assurance measurement of the 1-125 RAPID Strand™ under sterile conditions. This source holder is constructed to simultaneously measure the ten 6711 seeds in the strand. A correction factor has been determined to calculate the activity.
Item 996-736: Source Holder for 90SR/90Y Sources: Centers the source in the active area of the well chamber for a measurement. The source holder is adjustable to fit the length of the source to be measured. This source holder accommodates both the 3.5 and the 5.0 mm french catheters.
Item 996-743: Source Holder for Single LDR Seeds: Is designed to position an individual LDR brachytherapy seed, like iodine or iridium, for a measurement. This source holder has a 1.2 mm diameter opening.
Item 996-745: Source Holder for Cesium: Has a 5.0 mm diameter opening and is commonly used with manually loaded cesium sources. A spacer within the source holder positions the cesium insert for a measurement. The spacer, for positioning the cesium source, is removable.
Item 996-747: Source Holder for MICK® Cartridges: Provides a consistency QA check of the activity of seed loaded into a MICK® cartridge. This source holder positions the cartridge for a quick, reproducible measurement.
Item 996-749: Source Holder for IBt InterStrand®: Is designed for QA measurements of International Brachytherapy InterStrand® source trains. These consist of ten InterSource, 103Pd seeds or ten InterSource-125, 125I seeds, with an absorbable suture contained within the open annulus of each seed. The InterStrand® stainless steel shielding container connects to the top of the source holder for easy transfer of the InterStrand® to the source holder for measurement.
Item 996-750 Source Holder for Imagyn isosleeve™: Is designed for QA measurements of the Isosleeve™ prostate brachytherapy needle delivery system from Imagyn Medical Technologies. Each isosleeve™ needle is provided sterilized and custom-loaded according to the treatment plan. The polyimide sleeve within the isosleeve™ needle contains the seeds and spacers and may be removed from the needle hub so that the seeds can be assayed in the source holder.
Item 996-734: Source Holder for Iridium IVB Sources: Centers the source train in the active area of the well chamber for a measurement. The source holder is adjusted to accommodate the number of seeds in the source to be measured.
Item 996-742: X-Ray Contamination Test Tool: Is designed for use with 90Sr/90Y sources only. It consists of a 7 mm thick wall of delrin that absorbs nearly all of the beta particles. It allows only the bremsstrahlung radiation to pass through the source holder for measurement.
Item 996-744: Source Holder for HDR Iridium: Is designed for high dose rate iridium measurements. It has a 2.2 mm diameter opening for the catheter. A rubber o-ring secures the catheter with a uniform constricting pressure to prevent and movement of the catheter.
Item 996-746: Source Holder for Cesium Remote Afterloading: Has a 7.1 mm diameter opening. This insert is used with LDR remote afterloading treatment systems. There is no spacer because the afterloading system positions the sources.
Item 996-748: Source Holder for RAPID Strand™ Iodine Seeds: Provides a fast and convenient method to perform a quality assurance measurement of the 1-125 RAPID Strand™ under sterile conditions. This source holder is constructed to simultaneously measure the ten 6711 seeds in the strand. A correction factor has been determined to calculate the activity.
Item 996-736: Source Holder for 90SR/90Y Sources: Centers the source in the active area of the well chamber for a measurement. The source holder is adjustable to fit the length of the source to be measured. This source holder accommodates both the 3.5 and the 5.0 mm french catheters.
Item 996-743: Source Holder for Single LDR Seeds: Is designed to position an individual LDR brachytherapy seed, like iodine or iridium, for a measurement. This source holder has a 1.2 mm diameter opening.
Item 996-745: Source Holder for Cesium: Has a 5.0 mm diameter opening and is commonly used with manually loaded cesium sources. A spacer within the source holder positions the cesium insert for a measurement. The spacer, for positioning the cesium source, is removable.
Item 996-747: Source Holder for MICK
Item 996-749: Source Holder for IBt InterStrand
Item 996-750 Source Holder for Imagyn isosleeve™: Is designed for QA measurements of the Isosleeve™ prostate brachytherapy needle delivery system from Imagyn Medical Technologies. Each isosleeve™ needle is provided sterilized and custom-loaded according to the treatment plan. The polyimide sleeve within the isosleeve™ needle contains the seeds and spacers and may be removed from the needle hub so that the seeds can be assayed in the source holder.