The vaginal depth scale can be used during simulation or for a port film. Position and magnification can be determined by counting the lead balls which are spaced 1 cm apart and are 5 mm in diameter.

The vaginal depth scales up to 3.5 cm diameter can be used with the standard holder (Item 707-020). The special vaginal depth scale holder (Item 707-030) is needed for the 3.8 cm diameter vaginal depth scale but will also accommodate all vaginal depth scales.

The CT Vaginal Depth Scale (Item 707-145) is 1.6 cm in diameter and 26 cm long and has teflon balls instead of the lead balls. Custom sizes are available.

Specifications
Material: Acrylic
Density: 1.1859 g/cm3
Lead Balls: 5 mm dia. spaced every 1 cm

An introitus marker is included with the 1.6 cm diameter vaginal scale (Item 707-000) or can be purchased separately. Introitus markers for all other vaginal depth scales are sold separately.

A thumb screw holds the introitus marker in position.

The vaginal depth scale holder has a swivel, angling joint that slides up/down on the baseplate post. This allows the vaginal depth scale to be adjusted and held at the proper height and angle.

The heavy steel base has a nickel chrome finish.

The standard holder accommodates all vaginal depth scales up to 3.2 cm in diameter. The larger holder is needed for the 3.8 cm diameter vaginal depth scale and will accommodate all vaginal depth scales. 

This holder can be used in CT if scanned area does not include the holder.

Radiation Products Design, Inc.         www.rpdinc.com           sales@rpdinc.com
 763-497-2071   Fax 763-497-2295   5218 Barthel Industrial Drive Albertville, MN 55301
* * * *  CLOSEOUT ITEMS * * * *