|
Chamber Holders for Mylar Window Phantom
|
|
Item #
|
Description
|
Size
|
Tip
|
|
692-600
|
Option “A” w/50 cm Scale
|
7/8”
|
Polystyrene
|
|
692-610
|
Option “B” w/50 cm Scale
|
7/8”
|
Acrylic
|
|
692-620
|
Option “C” w/50 cm Scale
|
5/8”
|
Polystyrene
|
|
692-630
|
Option “D” w/50 cm Scale
|
5/8”
|
Acrylic
|
|
 • Waterproof
• Included o-ring assembly
• Scaled acrylic tube
The chamber holders are watertight acrylic tubes that have a 1 mm thick polystyrene or acrylic tip for Farmer-style Ion Chambers. A 50 cm scale is printed on the tube. No further waterproofing is necessary.
Item 692-600 and 692-610: Fits Capintec PR-06C or G with TNC connector.
Item 692-620 and 692-630: Fits all Farmer-style chambers except Capintec PR-06C or G with TNC connector. |
The Option “N” Chamber Holder has a 5/8” O.D. tube and is a combination holder. It can be used for the Markus chamber, and the 0.3 cm3 or 0.1 cm3 chambers. This holder can be used both horizontally or vertically.
The Option “H” Chamber Holder is a has 5/8” O.D. acrylic tube used with the PTW 23332/233641/31003/31013 waterproof chamber.
The Option “L” Chamber Holder has a 5/8” O.D. acrylic tube and holds a PTW 23332/233641/31003/31013 chamber parallel to the water surface.
The Option “M”, “O”, and “Q” Chamber Holders have a 7/8” O.D. Tube and are used to hold a Markus (PTW 23343), Roos (PTW 34001) or Exradin Model 11 Chamber parallel to the water surface.
The Option “K”, “P”, “R” and “S” Chamber Holders are used to hold a Markus (PTW 23343), Roos (PTW 34001), Exradin Model 11 or Exradin Model 10 Chamber parallel to the mylar window.
