View PDF Catalog Closeout Items 
MR/CT Titanium Flex Arm for Zephyr HDR
Specify Clamp when Ordering
Note: Zephyr bracket is not included
MR/CT Titanium Flex Arm for Zephyr HDR
The MR/CT Conditional Titanium Flex Arm was designed for use in MR or CT to hold a HDR Nucletron, HDR Varian, HDR Eckert & Ziegler, FSD LDR Applicators, Vaginal Cylinder, Tandems or other objects securely in place during GYN brachytherapy treatment on the Diacor Zephyr HDR System.
The vertical post allows the Flex Arm to rotate 360° and has vertical markings every half centimeter from 3cm to 15cm. The wing knob on the vertical post clamp locks the elevation, rotational and in/out position of the Flex Arm. Slightly tightening the wing knob will lock the vertical post clamp in rotation and elevation. Further tightening will lock the in/out travel of the Flex Arm. The wing knob at the end of the Flex Arm locks the swivel of the applicator clamp. Loosen the Flex Arm wing knob to adjust the swivel of the applicator clamp into position and attach to the treatment applicator. When attached to the treatment applicator, tighten the Flex Arm wing knob at the end of the Flex Arm. Then tighten the post wing knob to lock in/out position of the Flex Arm.
The applicator clamp end of the Flex Arm has a cutout swivel that houses a ball stud and allows the applicator clamp 360° of rotation. A thumb screw will lock the clamp and another thumb screw locks the board rail block.
Specifications
Base Size: 3" x 3" x 3" (7.62 x 7.62 x 7.62cm)
Base Material: Black Delrin
Rail: 3" Long Titanium (7.62cm)
Flex Arm Size
Arm Height: 16.2cm
Flex Arm Material: Titanium
Vertical Post Material: Black Aluminum
How to Order
Order the arm system with the item number extension added to the end of the item number for the clamp that matches your intended use.
See GYN Clamp Options Chart here
Example: Choose item number 978-65001 for MR/CT Titanium Flex Arm for Zephyr HDR 6mm/8mm Clamp Holes
Note: Zephyr bracket is not included
