View PDF Catalog   

Closeout Items   

4X Hi-Low Illuminator, 2 Over 2 Viewing Areas, Recessed Wall Mount, Auto Switch

4X Hi-Low Illuminator, 2 Over 2 Viewing Areas, Recessed Wall Mount, Auto Switch
4X Hi-Low Illuminator, 2 Over 2 Viewing Areas, Recessed Wall Mount, Auto Switch
Item Number :
1020-532

4X Hi-Low Illuminator, 2 Over 2 Viewing Areas, Recessed Wall Mount, Automatic Switch.

Details

Open section A-Imaging_Graticules(PDF) to view related products. (Opens in a new tab)

4X Hi-Low Illuminator, 2 Over 2 Viewing Areas, Recessed Wall Mount, Automatic Switch.

The 4X Hi-Low Illuminators have a unique four tube dual brightness system which provides two levels of light intensity.  Each 14" x 17" (35.68 x 43.33 cm) viewing area has four F15T8/D fluorescent tubes; two low leakage thermally protected ballasts and specially designed reflectors.  On the low setting light distribution is far superior to conventional two tube viewers.  When additional illumination is required a touch of a switch increases the light output of the four lamps to their maximum brightness.  Each viewing section is controlled by an on/off rocker switch and a Hi-Low brightness selector switch.  A master on/off switch is also supplied for each tier of three or more banks.  All switches are grouped together and mounted in the center of the front panel on the bottom tier.

Low leakage instant on ballasts, internal dividers (to prevent light “spill over”), centered cluster switches, one piece Plexiglas fronts and continuous stainless steel gravity film grips are supplied as standard.  A master on/off switch is also supplied for each tier of three or more banks.  Each tier of the illuminator is of one piece heavy duty steel construction.

Recessed models come complete with recessing flanges (in white baked enamel) permanently welded to the case.  Holes are provided in the flange for ease of mounting.

• Dual Brightness System

• Four 15W Fluorescent Tubes Per Viewing Section

• Superior Light Distribution

• Surface and Recessed Models

• Positive Gravity Grip Film Holder

Finish
White Baked Enamel, Stainless Steel Trim (recessing flanges are white baked enamel.

Electrical
Viewers operated on 120 volt, 60 Hz, 1.6 Amps AC per viewing area.  Surface mounting models are supplied with a 6’ three conductor line cord.  Recessed models come with BX connectors.

Options
1 to 6 banks wide

1 or 2 tiers

Automatic or standard switches

Hospital grade plug

Dimensional Information
Case Width:  28.75" (73.3 cm)
Wall Opening:  29" (73.9 cm)
Case Depth:  3.75 (9.6cm)

Height Dimensions Single Tier
Case Height:  43" (109.6 cm)
Wall Opening:  43.25" (110.2 cm)