View PDF Catalog   

Closeout Items   

Plain High Sensitivity MOSFET Dosimeter, 5 Pack

Plain High Sensitivity MOSFET Dosimeter, 5 Pack

Item Number :

Plain High Sensitivity MOSFET Dosimeter, 5 Pack.


Open section P-Diodes_Dosimeters_Electrometers(PDF) to view related products. (Opens in a new tab)

Plain High Sensitivity MOSFET Dosimeter, 5 Pack.

Plain MOSFET Dosimeter
The plain MOSFET dosimeter does not have the protective plastic coating.  Customers using phantoms with tight tolerances may require the plain dosimeter otherwise, the reinforced dosimeter is recommended.

High Sensitivity MOSFET Dosimeter
The high sensitivity MOSFETs are three times as sensitive as the standard MOSFETs and help to maintain reproducibility at low doses.  The high sensitivity MOSFETs are ideal for scatter doses to regions at risk, or radiology dose measurements.

• One calibration factor for all photon and electron modalities in the radiotherapy energy range

• Isotropic (± 3% or better for 360°)

• Active region of 0.2 x 0.2 mm

• Permits pinpoint measurement without patient shielding

• Dose-rate and temperature independent

• Unobtrusive in procedures

• Lightweight and flexible

• Multiple dosimeter capability with one reader

Flex Dimensions*: 
With of Flex:
  2.5 mm
Thickness of Flex (flat part of flex):  0.3 mm
Length of Flex (from end of gray cable):  200 mm
Thickness of Bulb:  1.3 mm
Length of Bulb:  8.0 mm
Distance to Center of Chip (from end of bulb):  4.0 mm
Common Uses:  Dose verification during radiotherapy treatments; beam QA

*Measurements listed above are average values and are meant to serve as a guide for the use of MOSFET dosimeters.  For phantom use and tolerances, please contact Best Medical Canada directly for more detailed information.

Note: MOSFET Dosimeters are available with a 10' (3 m) cable upon request.

Data Sheet