View PDF Catalog   

Closeout Items   

CT / PET Table Insert for Siemens, with Foam Rubber Edging, and Magnification and Density Rods

CT / PET Table Insert for Siemens, with Foam Rubber Edging, and Magnification and Density Rods
CT / PET Table Insert for Siemens, with Foam Rubber Edging, and Magnification and Density Rods
Item Number :
683-320

CT / PET Table Insert for Siemens, with Foam Rubber Edging, and Magnification and Density Rods

Details

Open Section G: CT Simulators, CT Products, Chambers, Lasers, Phantoms(PDF) to view related products. (Opens in a new tab)

CT / PET Table Insert for Siemens, with Foam Rubber Edging, and Magnification and Density Rods

The ideal CT Image for radiation therapy treatment planning should have the patient on a flat table, magnification indicators, and density markers.

The Radiation Products Design CT/PET Table Insert is made of 3/8" (0.97 cm) clear polycarbonate.  The insert measures 84" (213.5 cm) long and the width is custom made to fit the CT or PET Table.  A center support runs the length of the insert to prevent any sag.

The CT/PET Table Insert with foam rubber edges will sit on top of the edges of the curved CT bed. 

Magnification and Density Rods
The bottom of the CT/PET Table Insert has two 1/8" (3.31 mm) diameter aluminum rods, spaced 30 cm apart that run the length of the insert and are used for magnification measurements.

A 1" (2.54 cm) diameter polystyrene rod and a 1" (2.54 cm) diameter acrylic rod are placed on either side of the center support.  Both these rods run 72" (183 cm) along the bottom of the insert.  These rods provide a reference for density checks.

Specifications
Table Density: 
Polycarbonate:  1.2 g/cm3

Rod Density: 
Acrylic:  1.185 g/cm3
Polystyrene:  1.05 g/cm3

Size:  84" L x 3/8" T (213.4 x 0.97 cm)
Weight:  55 lb (25 kg)

Order Processing Information
• Provide contact information, name, phone number and email

• Prior to manufacturing an information sheet requesting dimensions will be sent to the contact to fill out


Documents